Treatment plant for domestic wastewater

ClearFox® QuickOne SBR-Kit – ideal treatment plant for domestic wastewater

Domestic wastewater treatment

Treatment plant for domestic wastewater

ClearFox® QuickOne SBR-Kit – ideal treatment plant for domestic wastewater

Domestic wastewater treatment

Project Details


Size 16 PE
Location Estonia
Completed 2023

Project Delivery


Features Direct discharge
Below-ground installation
Reliable wastewater treatment
Treatment Modules ClearFox® QuickOne SBR-Kit

Project Results


Before After
COD >2,000 mg/l <600 mg/l

Discussion


Situation

A customer from Estonia was looking for a treatment plant for domestic wastewater to ensure wastewater treatment for a newly built house. For this, he turned to PPU, as the Bayreuth-based company has over 15 years of experience in domestic wastewater treatment. The house has a capacity of 16 PE. The sewage treatment plant for this was to be installed underground if possible.

Problem

The challenge in this project was the customer’s wish to discharge the treated wastewater directly into the environment. This requires particularly reliable wastewater treatment, as – especially in the case of below-ground solutions – it is difficult to intervene in the system.

Solution

The ideal solution for this project was a ClearFox® QuickOne SBR kit for installation in a plastic tank. For this, the customer requested the SBR kit to be installed independently in a tank, which he had produced locally. For this purpose, the ClearFox® team provided him with all the information and drawings to start up the treatment plant for domestic wastewater on his own. For this purpose, the customer also received training at PPU to be able to install future solutions independently.

With the ClearFox® QuickOne SBR kit, PPU also supplied a control unit that guarantees reliable wastewater treatment. This can react individually to higher or lower loads and adjust the treatment performance.

The tank, which the customer had produced locally, consists of two chambers: A buffer tank and a biological reactor. The buffer tank first balances the flow peaks. In addition, the coarse solids settle there. Then the wastewater enters the biological reactor, where it is aerated. This allows the microorganisms to break down the contaminant load in a controlled manner. After treatment, the wastewater is suitable for direct discharge into the environment.

Have a question about your own project?

Fill out this field
Please enter a valid email address.
Fill out this field
You need to agree with the terms to proceed

Featured Modules

ClearFox QuickOne SBR-Kit
ClearFox control cabinet

Explore our ClearFox® success stories

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.