Below ground sewage treatment in southern Iran

ClearFox® QuickOne for below ground sewage treatment for a steel factory

Sanitary wastewater treatment for industrial plants

Below ground sewage treatment in southern Iran

ClearFox® QuickOne for below ground sewage treatment for a steel factory

Sanitary wastewater treatment for industrial plants

Project Details


Size 14 PE
Location Iran
Completed 2022

Project Delivery


Features Reliable cleaning performance
Below ground installation
Treatment Modules ClearFox® QuickOne

Project Results


Before After
COD 1500 mg/l 100 mg/l
BOD 800 mg/l 25 mg/l

Discussion


Situation

A steel factory in southern Iran produces about 2.1 cubic metres of wastewater per day, which corresponds to a capacity of about 14 PE. The operator of this steel factory wanted a system for the below ground sewage treatment of the accumulating sanitary wastewater. On the one hand, this has an increased COD and BOD5, and on the other hand, oils and fats are mixed into the wastewater when washing hands. These must not be released into the environment without treatment.

Since southern Iran is close to the Persian Gulf, the groundwater table is very high. Therefore, it is not possible to dig wells for wastewater disposal. For this reason, the client wanted a system for below ground sewage treatment. In the steel factory, the wastewater volumes occur very irregularly. Especially at night and on weekends, the wastewater flow is lower. The system should therefore be able to compensate for the inflow peaks.

Problem

The challenge in this project was the high groundwater table and its direct connection to the sea. Since environmental protection is becoming increasingly important in Iran, the treated wastewater must not come into direct contact with the groundwater. Therefore, an additional pumping station was necessary, which pumps the wastewater into a separate catch basin after treatment.

Solution

The best solution for this project was a ClearFox® QuickOne system. The tank is rotationally moulded so that it has no predetermined breaking points. This way, the ClearFox® team guarantees a long durability of the tank and the installed system. It can also be installed underground without any problems. An integrated pump system transports the treated wastewater back to the surface and directs it into the catch basin.

An automated system specially adapted to the project supplies the microorganisms in the wastewater with oxygen. This allows them to grow in a controlled manner and treat the dissolved and non-dissolved substances in the wastewater. The system reliably lowers the existing COD and BOD5 through a defined cleaning cycle. Thus, the ClearFox® solution meets the customer’s requirements in the best possible way.

Have a question about your own project?

Fill out this field
Please enter a valid email address.
Fill out this field
You need to agree with the terms to proceed

Featured Modules

ClearFox sanitary wastewater treatment
ClearFox below ground installation

Explore our ClearFox® success stories

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.